AOR ARD300
Digital Decoder

Return to AR6000

Wideband Receiver Options 
AOR logo

 

AOR ARD300

The AOR ARD300 is a digital decoder that will bring the world of digital modes to your wideband receiver. It decodes many amateur digital voice modes such as those used by Icom, Alinco and Yaesu. It also decodes APCO P25 and DMR voice signals used by many governments worldwide. The front panel features an 8 character, two-line display. Audio output is provided to a " headphone jack on the front panel and a speaker built into the top panel. The rear panel features the IF port [BNC], Audio In and Audio Out (mini), Service port (DB9 male), DC input and DC output.

Supported modes include:
P25 (Phase 1 conventional) C4FM IMBE
D-Star Icom GMSK AMBE
Alinco GMSK AMBE (for EJ-47U only)
Yaesu C4FM AMBE+2 (V/D mode)
Digital CR C4FM AMBE+2
Icom/Kenwood NXDN C4FM AMBE+2 6.25 kHz
dPMR (dMPR446 and Tier 1 mode)

The ARD300 is compatible with the AR6000 and many other receivers that have either 10.7 MHz or 45.05 MHz output.
In the case of the AR6000, the ARD300's required 10.7-16 VDC @300 mA may be powered from receiver's power supply.
Supplied with:  DC power cable, BNC IF cable, audio cable and printed Owner's Manual.
Please note that the modes covered by this device are primarily to be found on VHF-UHF frequencies.
This is a special order, non-returnable item.



Copyright 2014-2016 Universal Radio, Inc.