Return to Home Page

AOR TVA1
TV Adapter

Return to AR5000A

Discontinued Wideband Receiver Options 
AOR logo

 


Larger Image | Rear Panel

TVA1

The AOR TVA1 is designed for use with the AR5000 or AR5000+. It demodulates audio and video signals. The signal is tapped from the 10.7 MHz IF output of the receiver. There is a switch on the front to select either conventional broadcast NTSC TV [AM] or security camera TV [FM]. (The European PAL format is not supported). There is a second switch to select 5.5 MHz or 6.5 MHz FM subcarrier frequency. The TVA1 operates from 12 VDC external power. A 39 inch (1 m) coaxial jumper cable with a male BNC at each end is supplied to connect the TVA1 to the receiver. There is an RCA phono jack for video and an RCA phono jack for audio. These jacks would typically connect to a composite video monitor (not supplied). Most newer televisions also have separate video and audio inputs, and could be used. (Please note that a VGA computer monitor will not work). This product has a six month manufacturer's limited warranty.

(If you have an AOR AR5000A and require an internal TV adapter please see the TV5000A).

Specifications
Video Format: NTSC
Video Output: 1 V p-p (75 ohm) RCA phone Jack
Audio Output: 0.3V ms (47 k ohm) RCA phone Jack
Input: 10.7 MHz BNC from receiver
Operating Temperature: 14 - 114° F
Dimensions: 3.75 x 3.5 x 1.2 inches
Weight: 4.2 ounces
Power Requirements: 12 - 13.5 VDC [+] or included 120 VAC AC adapter
Supported radios: AR5000, AR5000A, AR5000C, AR5000+3 or AR8600 (non-color output).

Please note that American broadcast television converted to a digital format on 02/17/09. After this date you cannot view broadcast television with this device.



Copyright 2004-2010 Universal Radio, Inc.