|Microphones & Boomsets|
Bob Heil offers yet another unique product that will answer the audio problems for early Icom transceiver owners. This mic was designed for the pre PRO Icom models and the current 703, and 706 models (the 703/706 models require the HSTA-706 adapter sold separately). (It will also work with the 746/756 series, but you will have to cut the mic gain back). It will also work with the IC-7000 with the HSTA-iM adapter (sold separetly).
The Heil icm ICOM only mic is not the inexpensive electrets so common today, but a high performance electret with very high output to drive the low gain front ends of the early ICOM and exhibiting wide frequency range.
The iCM contains the 'Heil 'iC' element in a beautiful new platinum finish body perfect for hand held use or mounting on a desk stand or microphone boom. It is supplied with a universal mic clip that will interface with a variety of stands and booms.
The 'iCM' comes complete with an self attached 5 foot length of the 'Heilwire' cable and terminates in the familiar 8 pin Foster connector wired to mate with all early 8 pin Icom front ends. A 1/4 inch female pig tail exits this 8 pin connector that allows the interface of a footswitch or hand switch (both optional) to control the PTT line. A Soft touch PTT switches is mounted on the body of the iCM. The frequency range of the new high performance Heil 'iC' element is 35 Hz to 10,000 Hz @ -3dB. Perfect for the early ICOM audio preamplifiers.
Copyright 2004-2016, Universal Radio, Inc.