T22A Specifications
| General |
- Frequency Coverage:
- Tx: 144-148 MHz; Rx: 136-174* MHz (* 144-148 guaranteed)
- Mode: FM
- Acceptable power supply: 4.5 to 16 V DC
- Number of memory channels: 87 (max.)
- Tuning steps: 5, 10, 12.5, 15, 20, 25, 30 or 50 kHz
- Dial select steps: 100 kHz or 1 MHz
- Current Drain (at 13.5 V, typical values):
- Transmit (high): 1.4 A; Transmit (low): 500 mA
- Receive (rated audio): 150 mA; Receive (power saved): 15 mA (average)
- Usable Temperature Range: -10°C to +60°C; +14°F to +140°F.
- Dimensions: (with BP-171 or BP-180): 2.25(W) x 4.81(H) x 1.125(D) inches 57(W) x 110(H) x 27(D) mm;
- Weight: 10.9 oz (310 g);
|
| Transmitter |
- Output power:
- At 13.5 or 9.6 V: 5 W or 500 mW
- At 7.2 V (approx.): 3.5 W or 500 mW
- Modulation system: Variable reactance frequency modulation
- Spurious emissions: Less than -60 dB
- Maximum frequency deviation: ±5.0 kHz
- Microphone impedance: 2000 ohms
|
| Receiver |
- Receive system: Double conversion superheterodyne
- Intermediate frequencies:
- 1st: 30.85 MHz
- 2nd: 450 kHz
- Sensitivity (typical): Less than 0.16 µV
- Squelch sensitivity (at threshold): Less than 0.16 µV
- Spurious and image rejection:
- Less than -60 dB
- Audio output power (at 13.5 V): More than 200 mW (10% distortion with an 8 ohm load)
- Audio output impedance: 8 ohms
- Specifications are subject to change without notice or obligation.
|
|
