Alinco DJ-596T
Specifications
DJ-596T Specifications
| GENERAL | |
| Receive Frequency (original status) | 130 to 173.995 MHz and 400-511.995 MHz (F2 F3E only) |
| Transmit Frequency | 144 to 147.995 MHz and 420-449.995 MHz (F2 F3E only) |
| Frequency Stability | ± 5ppm 14° to 140°F. (-10° to +60°C.) |
| Antenna Impedance | 50 ohm unbalanced |
| Supply Voltage | DC 13.8V rated (6.0 min to 16V max) |
| Ground | Negative Ground |
| Transmit Current Consumption (@13 VDC) | 1.2 Amps/1.4 Amps (5 watts) |
| Receive Current Consumption (@13 VDC) | 250 mA (75 ma squelched, 25 ma battery save) |
| Operating Temperature Range | 14° to 140°F. (-10° to +60°C.) |
| Dimensions (without projections) | 2.2 x 4.9 x 1.5 inches (56x124x40 mm) |
| Weight | 11 oz (310 g) |
| TRANSMITTER | |
| Output power at 13.8 VDC | 5.0/5.0 Watts |
| Output power with EBP-50N | 4.5/4.0 Watts |
| Modulation | Variable reactance |
| Maximum Deviation | ± 5 kHz |
| Spurious Emission | less than -60db |
| Microphone Impedance | 2k ohms |
| RECEIVER | |
| Circuit | Double conversion superheterodyne |
| 1st IF Frequency | 39.15 MHz |
| 2nd IF Frequency | 450 kHz |
| Sensitivity 12db SINAD | -15 dbµ |
| Selectivity except WFM | ± 6 kHz -6db |
| Spurious response | >-60db |
| AF out at 10% distort. 13.8V | Max 200 mW |
| AF impedance | 8 ohms |
| Specifications are subject to change without notice. |