Alinco DJ-S45T
Specifications
DJ-S45T Specifications
| GENERAL | |
| Receive Frequency | 420 to 474 MHz (F2 F3 only) |
| Transmit Frequency | 420 to 449.995 MHz |
| Tuning Steps | 5, 10, 12.5, 15, 20, 25, 30, 50 kHz |
| Frequency Stability | ± 5ppm (-10° to +60°C.) |
| Antenna Impedance | 50 ohm unbalanced |
| Supply Voltage | 3 - 6 VDC |
| Ground | Negative Ground |
| Transmit Current Consumption | 1 amp High, 0.45 amp Low |
| Receive Current Consumption | 60 mA |
| Operating Temperature Range | -10° to +60°C. |
| Dimensions (w/o projection) | 2.2 x 4.0 x 1.2 inches inches (57 x 98 x 28 mm with dry cell case) |
| TRANSMITTER | |
| Output power High | 2.0W at ext. 6VDC, 1W with optional EBP-60, 0.5W with alkaline AAx2 |
| Output power Low | 0.5W at ext. 6VDC, 150 mW with alkaline AAx2 |
| Modulation | Variable reactance FM |
| Max. Deviation | ± 5 kHz |
| Spurious Emission | less than -60db |
| Microphone Impedance | 2k ohms approx. |
| RECEIVER | |
| Circuit | Double conversion superheterodyne |
| 1st IF Frequency | 21.7 MHz |
| 2nd IF Frequency | 450 kHz |
| Sensitivity 12db SINAD | -15 dBu or less |
| Selectivity | More than 6 dB/6 kHz, Less than -60 dB/35 kHz |
| AF out at 10% distort | Max 180 mW |
| AF impedance | 8 ohms |
| Specifications are subject to change without notice. |