Return to Home Page

Icom IC-T70A
Specifications

Return to T70

Amateur Handheld Transceivers 

Icom logo

 

IC-T70A Specifications

General
  • Frequency Coverage:
  • VHF:
    • Tx: 144-148 MHz
    • Rx: 136-174 MHz (guaranteed 144 - 148 MHz only)
  • UHF:
    • Tx: 420-450 MHz (guaranteed 440 - 450 MHz only)
    • Rx: 400-479 MHz (guaranteed 440 - 450 MHz only)
  • Mode: FM, FM-N
  • Power supply: 10 to 16 V DC, or specified battery pack
  • Number of memory channels: 302 (includes 50 scan edges and 2 call channels)
  • Tuning steps: 5, 10, 12.5, 15, 20, 25, 30, 50, 100, 125, 200 kHz
  • Usable Temperature Range: +4F to +140F (-0C to +60C)
  • Antenna connector: SMA (50 ohm)
  • Current Drain (at VHF/UHF, typical):
    • Tx (7.2 V DC) at 5.0 Watts: 1.7 / 2.1 A
    • Tx (7.2 V DC) at 0.5 Watts: 0.6 / 0.8 A
    • Rx (7.2 V DC) max audio internal speaker: 450 mA
    • Rx (7.2 V DC) power save: 40 mA
  • Dimensions: 2.35(W) x 4.4(H) x 1.2(D) inches (57x111x30mm)
  • Weight: 13.4 oz. (380 g)

 

Transmitter
  • Output power (at 7.2 V DC): 5.0 / 2.5 / 0.5 watts typical)
  • Modulation system: Variable reactance FM
  • Maximum frequency deviation: 5 kHz wide / 2.5 kHz narrow
  • Spurious emissions: Less than -60 dBc at High/Med.
  • External Mic connector: 3-conductor 2.5 (d) mm (1/10")/2

 

Receiver
  • Receive system: Double conversion superheterodyne
  • Intermediate frequencies: 1st: 46.35 MHz; 2nd: 450 kHz
  • Sensitivity: 0.18 V (at12 dB SINAD)
  • Squelch sensitivity: Less than 0.18 V
  • Selectivity: more than 60 dB FM wide/narrow
  • Spurious and image rejection ratio: More than 60 dB
  • Audio output power (at 7.2 V DC): 700 mW typ. at 10% distortion internal
  • Ext. SP connector: 3-conductor 3.5 (d) mm (1/8")/8
  • Specifications are subject to change without notice or obligation.

 


Copyright 2010, Universal Radio, Inc.