LDG AT-7000
IC-7000 Tuner

Discontinued

Replaced by
the IT-100

 

Specifications | Options | Rear View

The LDG AT-7000 is is the ideal tuner for your IC-7000. First, it matches up to 10:1 SWR (3:1 on 6 meters), so just about anything you can feed with coax is good to go. And, it has 2,000 (not a typo; that's 2,000!) memories, enough for every Dxpedition, RTTY spot and radio buddy you've got, and then some. Just hit the tune button on the radio, and your AT-7000 will set tuner parameters in less than a second if you've been there before. If not, it kicks off a full tuning cycle that will be over in about 3 seconds. Don't need the tuner just now? Then just tap the Tune button briefly, and the tuner goes into bypass. Press it again to bring the tuner back on line -- it's just that simple.

The AT-7000 is just 6.5L x 6.5W x 1.25H inches 1.5 pounds, and gets its DC power directly from the radio. No separate power supply needed. The rear panel features SO-239 input and output. The AT-7000 works with any Icom radio that supports AH-3 or AH-4 Icom antennas. This currently includes the IC-7000, IC-706MkIIG, IC-703Plus, IC-718, IC-746 and IC-756ProIII.

The AT-7000 package includes a 14 inch radio interface cable and a 14 inch coax jumper; you're ready to operate right out of the box. With LDG's famous 2 year warranty. IC-7000 shown above not included.

Specifications:
* 0.1 to 125 watt power range (SSB and CW), 100W on 6M
* 2000 memories for instantaneous band changing.
* Power rating 6M (50 to 54 MHz): 100 watts
* Controlled from Icom Tuner button on radio.
* Compatible with any Icom radio that is AH-4 or AH-3 compatible.
* Compatible with: 7000, 706 (all), 703, 718, 746 and 756 (all).
* Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
* 1.8 to 54.0 MHz coverage. Built-in frequency sensor.
* Tunes 4-800 ohm loads (16-150 on 6M), 4-3200 ohms with optional 4:1 Balun.
* For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna.
* Ready to use with included Icom interface cable and coax jumper.

Options

Order #	Photo	Item	Description	List Price	Your Price	Order
#2286		RBA 4:1	Balun 4:1 (assembled). 1.8-30 MHz 200 watts. INFO	$  30.00	$  28.95