ICOM IC-7200
Specifications

Return to 718

HF Amateur Transceivers  

logo

 

IC-7200 Specifications

General
  • Frequency Range:
    • RX 0.030-29.999999 MHz (guaranteed range: 0.5-29.999999 MHz)
    • TX 1.800-1.999999 MHz, 3.500-3.999999 MHz (varies with version)
    •   5.3305, 5.3465, 5.3665, 5.3715, 5.4035 *2
    • 7.000-7.300000 MHz, 10.100-10.150000 MHz
    • 14.000-14.350000 MHz, 18.068-18.168000 MHz
    • 21.000-21.450000 MHz, 24.890-24.990000 MHz
    • 28.000-29.700000 MHz, 50.000-54.000000 MHz
  • Mode: USB, LSB, CW, RTTY (FSK), AM
  • No. of memory channels: 201 (199 regular, 2 scan edges)
  • Frequency resolution: 1 Hz
  • Frequency stability: Less than 0.5 ppm.
  • Power supply requirement: 13.8 V DC 15% (negative ground)
  • Current drain (at 13.8 V DC):
    • Receive: stand-by 1.3 A ; max audio 2.0 A
    • Transmit: max. power 22.0 A
  • Usable temperature range: -10C to +60C (+14F to+140F)
  • Antenna connector: SO-239 (50 ohm)
  • Dimensions: 240mm (W) x 95mm (H) x 239mm (D)
  • (projections not included) 9 7/16in (W) x 3 3/4in (H) x 11 1/16in (D)
  • Weight: 5.5 kg; 12.1 lb
  • ACC connector: 13-pin
  • REMOTE connector: 2-conductor 3.5 (d) mm; (1/8")

 

Transmitter
  • Modulation system:
    • SSB: Digital PSN modulation
    • AM: digital low power modulation
  • Output power:
    • SSB, CW, RTTY: 2-100W
    • AM: 1-40W
  • Spurious emissions: Less than -50 dB below peak output power
  • spurious freq.; below 30 MHz: -50dB, above 30 MHz: -63dB
  • Carrier suppression: More than 50 dB
  • Unwanted sideband: More than 50 dB
  • Microphone connector: 8-pin connector (600 ohm)
  • KEY connector: 3 conductor 6.5 (d) mm (1/4")
  • SEND connector: Phono (RCA)
  • ALC connector: Phono (RCA)

 

Receiver
  • Receiver system: Triple-conversion superheterodyne
  • Sensitivity: (10 dB S/N)
    • SSB, CW, RTTY: 0.16 V (1.8-29.999999 MHz)
    • AM: 13 V (0.5-1.799999 MHz)
    • AM: 2 V (1.8-29.999999 MHz)
  • SQL sensitivity: Less than 5.6 V (SSB)
  • Selectivity:
    • SSB, CW, RTTY: More than 2.4 kHz/-6 dB
    • Less than 3.6 kHz/-60 dB
    • AM: More than 6.0 kHz/-6 dB
    • Less than 16 kHz/-60 dB
  • Spurious and image rejection ratio: More than 70 dB (1.8-29.999999 MHz)
  • Audio output power: More than 2.0 W at 10% distortion with at 8 ohm load (at 13.8 V DC)
  • RIT variable range: 9.9 kHz
  • PHONES connector: 3-conductor 6.5 (d) mm (1/4")
  • EXT SP connector: 2-conductor 3.5 (d) mm (1/8") 8 ohms
  • Specifications are subject to change without notice or obligation.

 


Copyright 2008-2010, Universal Radio, Inc.