The Gap Voyager DX was the first antenna manufactured specifically to provide efficient low band operation from the typical backyard without a huge investment in time, money and space. The Voyager is not another "add a kit" antenna for 160 meters. The GAP Voyager DX-IV incorporates the identical unique technology as in the Challenger DX-VIII to "open up" the low bands. Emphasis was given to 160 and 80 meters when designing the Voyager, because of the difficulties these bands create and the lack of previous technology to overcome them. Unlike the Challenger, the Voyager employs a capacity hat with circular ring to reduce the physical height to 45 feet while maintaining an electrical height of 66 feet. A capacity hat is the most efficient way to reduce height, maintain band width and eliminate corona. As an integral part of the design, GAP technology uses parallel tuner rods to perform a number of functions, one of which is on 40m. They create a vertical dipole for increased low angle gain. Unlike the trap multiband antenna, the Voyager utilizes the entire antenna on all bands.
For those who detest the need to "alter" purchased antennas, no tuning or matching is required to put the Voyager on the air. If you have always wanted to operate the low bands, go for DXCC on 80 meters or WAS on 160 meters, now with Voyager, you can. If you want to work CW on 3.55 and SSB at 3.95 or switch to 20 meters and work a JA, now you can -- without a tuner.
Noise is the unwanted companion of verticals -- particularly on the low bands. The Voyager, like all GAP verticals, is a "quiet" antenna primarily due to a sleeved feedline and the use of a counterpoise. GAP Antennas eliminate the deployment of thousands of feet of radial wires "parallel to" the power lines which transfer power line noise.
This antenna does not qualify for flat-rate shipping. We can provide shipping quotes.
Gap Voyager DX Specifications
Bands: 160, 80, 40 and 20 Meters.
Bandwidth (<2:1): Entire band on 80, 40 and 20 meters. 90 kHz on 160 meters.
Connector: UHF (SO239)
Mount: Ground. Aluminum pivot and guy brackets supplied.
Counterpoise: 3 at 57 ft. Deployment pattern is very flexible.
Wind Load: 7 sq. ft., requires two sets of guy ropes.
Ground Area Required: 4 guy anchor points 25 feet from base mount.
Height: 45 feet
Weight: 30 pounds
Copyright 2000-2016, Universal Radio, Inc.