Kenwood
TM-D700A
Specifications
TM-D700A| GENERAL | |
| Antenna Impedance | 50 Ohms | Current Receive Drain (approx.) | < 1.0A (VHF/UHF) | Current Transmit Drain (approx) | HI (50W (VHF), 35W (UHF): < 11.5A (VHF), 10.0 A (UHF) MID 10W: < 5.5A (VHF), 6.5A (UHF) LOW 5W: < 4.0A (VHF), 5.0A (UHF) |
Dimensions (W X H x D) | 5.51 x 1.58 x 7.68 inch (140 x 60 x 33.3 mm) |
Frequency (UHF) | TX: 430-450 MHz RX: 136-175 MHz 300-524 MHz 800-1300 MHz (less cellular) TX (SUB VHF): 144-148 MHz |
Frequency (VHF) | TX: 144-148 MHz RX: 118-470 MHz TX (SUB UHF): 438-450 MHz |
Frequency Stability | ±5ppm (+14° - +122°F) (-10° - +50°C) |
Mode | F1D, F2D, F3E, A3E (VHF Band) | Operating Temperature Range | -4° - +140°F | Power Requirement | DC 13.8V ±15% (minus) | Weight | Body: 2.6 lbs. (1.2 kg) Panel: 0.4 lbs. (180 g) |
| RECEIVER | |
| Circuitry | Double Super Heterodyne | Intermediate Frequency | 1st IF: 38.85 MHz (VHF), 45.05 (UHF) 2nd IF: 450 kHz (VHF), 455 kHz (UHF) |
Selectivity | -6 dB: More than 12 kHz -40 dB: Less than 28 kHz |
Sensitivity (12 dB SINAD) | LEss than 0.16 µV (VHF/UHF) | Squelch Sensitivity | Less than 0.1 µV (VHF/UHF) |
| TRANSMITTER | |
| Maximum Frequency Deviation | Less than ±5 KHz | Modulation | Reactance modulation | Modulation Distortion | Less than 3% (300Hz - 3kHz) | Modulation Impedance | 600 Ohms | RF Output Power | HI: 50W (VHF), 35W(UHF) MID: 10W (VHF/UHF) LOW: 5W (VHF/UHF) |
Spurious Radiation | Less than -60 dB | Specifications may be changed without notice. |
Copyright 2000-2010, Universal Radio, Inc.