208H Specifications
| General |
- Frequency coverage (Unit: MHz)
- VHF: Tx: 144-148, Rx: 118-174 (Guaranteed 144-148)
- UHF: Rx/Tx: 440-450
- Mode: FM, AM* (* U.S.A. version, RX only; 118-136 MHz; not guaranteed.)
- Number of memory channels: 512 (Including 2 call and 10 scan edges)
- Antenna connector: SO-239 (50 ohms)
- Power Supply requirement : 13.8 V DC +/-15%
- Useable temperature range : +14°F to +140°F (-10°C to +60°C)
- Frequency stability: +/-10 ppm
- Tuning step increments: 5, 10, 12.5, 15, 20, 25, 30, 50, 100 and 200 kHz
- Current drain (at 13.8 V DC)
- Receive squelched 0.8 Amps
- Maximum audio output 1.0 Amps
- Transmit at high power VHF 12 Amps, UHF 11.5 Amps
- Dimensions (projections not included):
- 5 1/2 (W) x 1 9/16 (H) x 7 5/16 (D) inches
- 141(W) x 40(H) x 185.4(D) mm
- Weight: Approx. 2.65 lb. (1.2 kg)
|
| Transmitter |
- Output power:
- VHF 55 W, 15 W, 5 W selectable
- UHF 50 W, 15 W, 5 W selectable
- Modulation system : variable reactance frequency modulation
- Max. frequency deviation : ± 5.0 kHz
- Spurious emissions : Less than -60 dB
- Microphone connector : 8-pin modular jack (600 ohms)
|
| Receiver |
- Receive system: Double conversion superheterodyne
- Intermediate frequencies: 1st 46.05 MHz, 2nd 450 kHz
- Sensitivity: Less than 0.18 micro V for 12dB SINAD (144/430 bands only)
- Squelch Sensitivity: 0.13 µV (at threshold)
- Selectivity :
- More than 12kHz/ -6 dB
- Less than 30 kHz/ -60dB
- Spurious rejection ratio: More than 60 dB
- Audio output (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load
- Ext. speaker connector: 2-conductor 1/8 inch (3.5 mm) 8 ohms
- Specifications are subject to change without notice or obligation.
|
|
